MSI K8N Neo4-F (PCB 1.0) driver 1.B is a BIOS and System Update driver from MSI. It runs on following
operating system: Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008. We recommend always using the most recent driver version available, so check for MSI K8N Neo4-F (PCB 1.0) driver new verison
on our site as often as possible.
Do not forget to set a system restore point before installing MSI K8N Neo4-F (PCB 1.0) driver 1.B driver, to avoid problems that may occurs when you install a
wrong driver, or for other OS version etc. If a problem occur than you may restore you computer to previous time, before installing the driver.
Publisher review: Update CPU ID.Specifications:CPU· Supports 64-bit AMD Opteron, Athlon 64 X2 Dual Core, Athlon 64 FX, Athlon 64 processor (Socket 939)· Supports up to 3500 , 3800 , Athlon 64 FX 53(55), or higher CPUChipset· NVIDIA nForce4 Chipset- HyperTransport link to the AMD Athlon 64/Athlon 64 FX CPU- HyperTransport supporting speed up to 1GHz (2000MT/s)- Supports PCI Express x16/x1 interface- Two independent SATA controllers, for four drives- Dual Fast ATA-133 IDE controllers- IEEE 802.3 NVIDIA MAC for 1000BASE-TMain Memory· Supports dual channel DDR 266/333/400, using four 184-pin DDR DIMMs.· Supports a maximum memory size up to 4GB without ECC.· Supports 2.5v DDR SDRAM DIMM.Slots· One PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)· One PCI Express x4 slots (support PCI Express x2 only)· One PCI Express x1 slots (support PCI Express Bus specification v1.0a compliant)· Four 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface). On-Board IDE· An IDE controller on the NVIDIA nForce4 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.- Can connect up to 4 IDE devicesOn-Board SATA· NV RAID supports 4 SATA ports.- Transfer rate is up to 150MB/s.NV RAID (Software)· Supports up to 4 SATA and 4 ATA133 Hard drives- RAID 0 or 1, 0 1, JBOD is supported- RAID function available for ATA133 SATA H/D drivesMSI Reminds You...· The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.Audio· 7.1 channel audio codec RealTek ALC850.- Compliance with AC97 v2.3 Spec.- Meet PC2001 audio performance requirement.LAN· Supports Gigabit LAN- Supports 10/100/1000 Fast Ethernet by Marvell 88E1111 PHYInternal I/O Connectors- ATX 24-Pin power connector- 4-pin ATX 12V power connector- CPU / System x 2 / NB FAN connectors- CD-in connector- Clear CMOS jumper- Chassis intrusion switch connector- 1 x IrDA infrared module header- 1 x MSI D-Bracket 2 Connector- Front panel audio connector- Front panel connector- 3 x USB 2.0 connector support additional 6 ports- 1 x Floppy disk drive connector- 4 x serial ATA connectors- 2 x ATA133 HD connectorsMSI Reminds You...· The floppy disk cable will be optional.Back Panel I/O Ports- 1 x Parallel- 1 x Serial port (COM 1)- 1 x PS/2 Keyboard- 1 x PS/2 Mouse- 1 x Coaxial SPDIF out- 1 x 6 in 1 Audio jack (S/SPDIF out)- 4 x USB 2.0- 1 x RJ45 LAN JackBIOS· The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.· The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.· Supports boot from LAN, USB Device 1.1 & 2.0, and SATA HDD.Dimension· 30.4cm(L) x 24.4cm(W) ATX Form FactorMounting· 9 mounting holes.
Operating system:Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008
Related drivers:View related drivers
MSI K8N Neo4-F (PCB 1.0) driver 1.B details 
Before you Download
